Now you can buy Vision Spinner II in India. One of the best electronic cigarettes on the market, it is an excellent choice for anyone who wants to give up smoking cigarette. One of the best features in this vaping kit is that it has the variable voltage feature. An electronic cigarette with variable voltage feature is a much better choice as compared to an electronic cigarette without it. This feature is usually present in higher end models that are quite expensive, but Vision Spinner II comes pre installed with all the circuitry you need for this feature.
Most of the electronic cigarettes provide you with a constant amount of vapor. But an electronic cigarette with variable voltage feature allows you to control the amount of vapor. This is done by controlling the voltage output from the battery. If you want thicker and richer vapor you can increase the voltage, if you are in mood for some light vaping you can simply keep it at minimum. You can adjust the voltage with the help of a twisting mechanism present at the end of the battery. Minimum voltage that can be set is 3.3V and maximum is 4.8V.
This product also features a built in LED light that is used to indicate different battery levels. White LED means that your electronic cigarette is fully charged and you are ready to vape, red means that there is about half the battery power left in it and orange means that you need to plug it in immediately. This way you will always be notified about the battery level of your electronic cigarette. It comes with a 1600mah battery that packs enough punch to last all through the day. Under normal usage, the battery can be expected to last more than 24 hours on a single charge. Buy original Vision Spinner 2 in India.
[alert ]Note: Use special caution when working with Li-ion cells, they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the user has enough knowledge of Li-Ion rechargeable batteries in charging, discharging and assembly before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. We are not responsible for damage if there is any modification of the batteries/chargers in any form or shape (including pack making).
VapourIndia is not responsible for any damage caused by misuse or mishandling of Li-Ion batteries and chargers. We only recommend using Lithium Ion rechargeable batteries with a control circuit (protection PCB) to assure safe charge, discharge, etc, use of lithium ion batteries without a protection circuit is potentially hazardous.
- Variable voltage Vision Spinner II. Original with tracking number from Vision for authentication.
- Twist from 3.3 to 4.8 volts for your desired taste
- Feels solid with long lasting battery life.
- 5 Click Lock/Unlock mechanism to prevent accidental clicks
- Attractive Rainbow Colour
- Low voltage, Short circuit protections
- Kangertech Mini Protank 3. Original with tracking number from Kangertech for authentication.
- 1.5ml Liquid Capacity
- Replaceable bottom dual coil
- Triple sealed to prevent leaks and to give rich vapour.
- Oxidised stainless steel mesh to avoid burnt taste
- 510 screw compatible with 510, Ego,Ego-T, Ego-C, Ego-W etc
- 1xMini Protank 3 clear atomizer
- 1×1650 mAh Vision Spinner II Battery
- 1xUSB charger
Spinner II Specification
|Model :||Vision Spinner II Mini Protank 3|
|Size :||L: 124.5mm; W: 14mm|
|Colors||Transparent Atomizer. Black Battery|
|Capacity :||1600 mAH Lithium, 3.3V – 4.8V|
|Charging life :||400 Cycles|
|Charging time (Full) :||2 hours|
|Puffs per battery :||800-1000 puffs|
|Resistance :||1.5 ohm|
|Atomizer Lifetime :||60000 Puffs|
|Puffs per Atomizer fill (1.5ml) :||480 puffs|
Can be used with any ego style or any 510 threaded accessories
- Wash the Clearomizer only in warm water.
- The best way to clean the wicks is to fill the unit half way with warm water, put the top on and then shake vigorously. This method should be repeated 3-4 times until the colour of the wick is as close to white as possible.
- Leave to dry and re-use.
How to use
- To fill the Mini Protank 3 Clearomizer unscrew the base unit or mouth piece by holding the battery upside down
- Fill with approximately 1.3 ml of liquid (along the side of the unit, avoiding the air hole or tube in the middle).
- While it is still upside down screw the mouth piece back onto the Clearomizer. The Mini Protank 3 is now ready for use.
- Once the atomizer head on your Clearomizer is burnt out, replace with a new atomizer head. To do this, just unscrew the old atomizer from the base unit and change over.
For information regarding our terms and conditions for warranty please click here. There you will find warranty information for all of our products.